Mining Machinery Concentrating Tables For Minerals Gravity Shaking Table Machine
Product Introduction
Shaking table is a gravity separating equipment for separating fine-grained materials, which is widely used for separating tin, tungsten, gold and silver, lead, zinc, tantalum, niobium, iron, manganese, titanium iron and coal. Our factory has a long history of producing shaking table, and constantly develop and innovate, from the initial straight bed surface shaking table based on the development of single curved wave bed surface shaking table (1970s), and then to the double curved wave bed surface shaking table (1990s), so that the shaking table's capacity, recovery rate and enrichment ratio have been substantially improved.
| Model | KL-Ls<6-s> | KL-Ys |
| Table structure | Fiberglass reinforced plastic,embeded skeleton composit structure | Fiberglass reinforced plastic,embeded skeleton composit structure |
| Table size | 1500-1850×4500mm | 1500-1850×4500mm |
| Selecting area | 7.5 m² | 7.5 m² |
| Direction | Left type and right type | Left type and right type |
| Slope | 0-5degree | 0-5degree |
| Stroke | 10-30mm | 8-22mm |
| Stroke number | 240-360times/min | 240-360times/min |
| Feeding size | Coarse sand 2-0.5mmfine sand 0.5-0.074mm slurry0.074mm | Coarse sand 2-0.5mmfine sand 0.5-0.074mm slurry0.074mm |
Description of Shaking Table
Manganese, gold shaking table is one of the main gravity separation equipment, which is widely applied to separate tungsten, tin, tantalum, niobium and other rare metal, noble metal as well, It can also concentrate iron, manganese and coal, etc, it owns the features of high concentration ratio and sorting efficiency, easy management and adjustment, achieving the final concentrate and tailing in one time.
Applications of Shaking Table
Manganese, gold shaking table widely uses in ores such as tungsten, tin, lead, zinc, gold, silver, tantalum, niobium, monacite, zircon, ilmenite planting the fissure filling or the placer ore dressing plant in processes the 3_0.019mm granularity ore in the rough sizing and the selection work.
Features of Shaking Table:
1. Great ratio of high-grade ore, efficient separating, easy operation, easy to adjust the stroke.
2. Strong wear resistance of the working surface.
3. Anti-chemical corrosion, acid and alkali.
4. Strong resistance to harsh evironment.
Working Principle of Shaking Table
The manganese, gold shaking table is shaken back and forth longitudinally, using a slow forward stroke and a rapid return strike that causes particles to raw along the deck parallel to the direction of motion. The lighter materials move up and over the riffles and down to exit on the tailings side of the table. Wash water is fed at the top of the table at right angles to the direction of table movement. These forces combine to move particles diagonally across the deck from the feed end and they separate out on the table according to size and density. Tables are most commonly used to recover gold from hard rock ores, but can also be used to recover other mineral materials of higher than normal density. They do an excellent job of recovering small gold particles, even with a fairly high feed rate.
Product Tags:
|
|
30mm Mining Machinery Concentrating Tables For Minerals Gravity Shaking Table Machine Images
|
